Which Wood Stretcher Bars Are the Best Fit?
If you purchase an independently reviewed product or service through a link on our website, ARTNews may receive an affiliate commission.
Behind every great canvas is a set of seriously tough stretcher bars—at least, that’s the hope. Flimsy bars and poor construction can doom an artwork the minute it’s mounted. Avoid that nightmare with stretcher bars made of wood—a traditional material that offers strength without breaking the bank. Rounded up below are our favorites, which all land somewhere on the Venn diagram of quality, ease of assembly, and affordability.
More from ARTnews.com
ARTnews RECOMMENDS
Utrecht Heavy-Duty Canvas Stretcher Bars and Keys
Solid and consistent, these stretcher bars fit squarely and are a great choice for artists of all skill levels. Made of ponderosa pine and hem fir, and seasoned and kiln-dried to resist warping, each measures 2? inches wide and features double-mortised and slotted corners to ensure a tight joint every time. These bars are solid enough to handle tension well yet take staples easily. They also come in more than a dozen sizes, from 10 to 85 inches, so you’ll almost always be satisfied. Plus, they are properly packaged to prevent damage while in transit, and they come with keys so you can tighten your canvas once fitted.
Buy: $3.26–$46.49
Utrecht Heavy-Duty Canvas Stretcher Bars and Keys
WE ALSO LIKE
Frank A. Edmunds Canvas Stretcher Bars
Can’t make up your mind on which sizes to buy? Grab a sample pack of bars. With this option, you get nine pairs of basswood bars in lengths from six inches to 18 inches, plus a nylon bag to store them. These sets can be used for painting, but they’re also designed with textile artists in mind: This is a fine choice for needlepoint and cross stitch projects, as the bars feature eased (aka rounded) edges, which helps to better distribute stretch while allowing you to skip the step of blocking. The basswood is pleasantly soft, splinter-free, and extremely lightweight.
Buy: Frank A. Edmunds Canvas Stretcher Bars $42.09
ANOTHER GOOD OPTION
Masterpiece Monet Pro Stretcher Bar Kit
Stretching a canvas for the first time? This set is good for beginners, although it’s a great choice for anyone seeking a bit of guidance. Each kit comes with two bars and one cross brace (two kits are needed for a full frame). The braces are keyable, so you can adjust the tension over time. The bars are an impressive 1 7/16 inches deep and 1 5/8 inches wide for easy stapling. Bars are available in sizes that increase in one-inch increments from 10 inches to 60 inches. Assembly instructions are on the label.
Buy: $11.39–$59.89
Masterpiece Monet Pro Stretcher Bar Kit
EDUCATORS’ CHOICE
Fredrix Standard Stretcher Bars
Need lots of bars for the classroom or a workshop? Buy in bulk and save some money with this cost-efficient option from Fredrix. They feature the manufacturer’s tried and true tongue-and-groove design, which offers reliably sturdy support. We’d rank these as light-duty bars, though, as they are thinner than our top pick, but you can always add corner braces for more strength. The packs of 50 are available in 10 lengths, from eight inches to 48 inches.
Buy: $61.84–$332.51
Fredrix Standard Stretcher Bars
PROFESSIONALS’ CHOICE
BEST Heavy-Duty Stretcher Bars
As the product name suggests, these bars are truly one of the best you can get. You’re paying more than the competition, but they will offer long-term stability and can tolerate the demands of large works. Made of kiln-dried white pine, which has a very low tendency to warp, the bars have been finger-spliced, which means that pieces of lumber have been bonded to yield an ultra-strong bar that stays durable even if you choose a piece on the longer end. The result is a smooth, drum-tight canvas. This is the only option on our list that offers sizes that increase in one-inch increments, from eight inches to a whopping 144 inches.
Buy: $4.93–$51.30
Best Heavy-Duty Stretcher Bars
Brought to you by the oldest and most widely circulated art magazine in the world, ARTnews Recommends helps you make the choice that suits you best from products in hundreds of art and craft supply categories. Our offerings are based on intensive research, interviews with artists and craftspeople, and the accumulated experience of the site’s editors and writers. We provide trustworthy and helpful advice about materials to artists ranging from beginner to professional.
1. Wraptek Canvas Stretcher Bar Kit
If you purchase an independently reviewed product or service through a link on our website, ARTNews may receive an affiliate commission.
This bundle nabs our top spot for several reasons. First, it comes in loads of sizes, with bars ranging from 8 to 60 inches. Second, you don’t have to worry about any additional odds and ends, since each kit comes with nails, corner braces, and corner clips, and for projects 18 inches square or larger, you get hanging hardware as well. All you’ll need is a hammer, screwdriver, and razor. For the whole enchilada, it’s a great deal.
Buy: Wraptek Canvas Stretcher Bar Kit
2. P&L Art Canvas Frame Kit
If you purchase an independently reviewed product or service through a link on our website, ARTNews may receive an affiliate commission.
If you want the near-customization of a Wraptek set without breaking the bank, here’s a runner-up that’s a little easier on your wallet. This kiln-dried stretcher bar kit is plenty sturdy and designed for one-person assembly (though some buyers suggest building with a buddy). Another huge perk: To assemble, you need nothing more than a pair of scissors.
3. Jack Richeson Heavy Duty Stretcher Bar
If you purchase an independently reviewed product or service through a link on our website, ARTNews may receive an affiliate commission.
Those who prefer buying individual bars, a la carte, should try this deluxe option. Jack Richeson’s heavy-duty strips are made of firm Wisconsin pine and offer much more expansive sizing than the other bars on our list. (Twelve feet square, anyone?) Be advised: You’re paying for quality here, so expect to shell out more if you go with these beauties.
Buy: Jack Richeson Heavy Duty Stretcher Bar
4. Fredrix Stretcher Strip
If you purchase an independently reviewed product or service through a link on our website, ARTNews may receive an affiliate commission.
If you’re looking for an inexpensive customizable option that doesn’t sacrifice on quality, Fredrix has you covered. Its stretcher bars, available in a range of sizes, features the manufacturer’s tried and true tongue-and-groove design, providing unflinching support to your canvases. This listing is for a single strip 24 inches long. For more dimensions and budget packs, visit the Fredrix store on Amazon.
5. Frank A. Edmunds Mini Stretcher Bar Set, Assorted Sizes
If you purchase an independently reviewed product or service through a link on our website, ARTNews may receive an affiliate commission.
Working on a mini opus? This pocket-size stretcher bar set, designed with needlepoint projects in mind, is a steal, with six pairs of bars measuring 6 to 16 inches long. A word to the wise: The stretcher bars are made of soft, pliable poplar wood, which makes for easy assembly but might not hold up to rough handling.
Buy: Frank A. Edmunds Mini Stretcher Bar Set, Assorted Sizes
Best of ARTnews.com