Fender Tone Master FR-12 review – a stylish, disarmingly simple solution to amplifying modelers and more that just works
Fender’s Tone Master Pro amp modeling floorboard is a significant new product from the company that practically invented the guitar amp, underlining the steadily increasing dominance of digital technology in the amplification market. The arrival of digital modelling floorboards brought with it another conundrum – how to amplify them?
At the upper end of the market, where many bands are using in-ear monitors with dedicated monitor mixes and the front-of-house PA system takes care of the rest, there’s no real need for conventional backline any more.
However, many players still prefer the convenience of an onstage loudspeaker that they have some measure of control over, while at grassroots level it’s still common for many bands to use a vocal PA and rely on backline to amplify their instruments.
With all of that in mind, Fender has introduced two new full range flat response (FRFR) powered speaker cabinets, primarily to partner the Tone Master Pro but more than capable of handling any input that needs a small self-contained PA. We’re taking a look at the larger one of the pair here, the FR-12.
At first glance, the FR-12 could easily be mistaken for Fender’s Hot Rod Deluxe, with similar dimensions and cosmetics. The silver sparkle grille and black Tolex combine for a classic look that’s instantly recognizable around the world. Move a little closer, though, and the differences become more obvious.
There’s a top-facing control panel with knobs for Volume, Treble, Middle and Bass, together with a Cut knob that reduces high frequencies as you turn it up. The other three EQ controls are active, providing up to 6dB of cut and boost at their center frequencies.
On the rear panel is a combi jack/XLR input socket and a balanced XLR output with its own ground lift switch for onward connection to PA consoles. The speaker grille is secured by industrial Velcro; removing it gives access to the 12-inch loudspeaker and compression driver, which sit on a ply baffle with two circular ports to project and smooth out the lows.
The rear baffle is completely sealed, while Fender’s traditional tilt-back legs help optimize projection. The FR-12 looks substantial – and it is – but special lightweight plywood and clever loudspeaker design have helped to keep the weight down to just 12.5kg. There’s nothing lightweight about the FR-12’s sonic capabilities, though, with a Class D power stage delivering a whopping 1,000 watts of power and a maximum SPL of 130dB.
In Use & Sounds
Thanks to its portability, the FR-12 is easy to deploy and set up, with its tilt-back legs neatly taking the place of cumbersome amp stands. It’s very easy to dial in, too, working from a flat response starting point with the tone controls in the centre detent position and the Cut control at zero. From here, you can quickly dial in EQ changes to suit any room, large or small.
As for volume, the FR-12’s 1,000-watt power stage ensures everything is heard with exceptional clarity, right down to the subtlest nuance. It’s this huge power reserve that lends weight and authority to the Tone Master Pro’s modeled amp dynamics, providing uncanny valve-like feel and ensuring everything is heard clearly, all the way to full-on powerchords and wailing solos.
The rear-panel XLR output is a useful extra that neatly side steps the problem of mic’ing up a multi-speaker cabinet, perfect for connection to front-of-house or recording consoles.
Verdict
There’s no doubt that if you own a modelling floorboard and you want to amplify it, then FRFR is where it’s at – and Fender’s FR-12 is a great solution, combining classic good looks with prodigious power and clarity. It’s relatively affordable, and if you need it there’s a more compact FR-10 cabinet with a 10-inch driver, which shaves a few inches off and loses a little weight, while retaining the same output power.
Like the Tone Master Pro modeling floorboard that it’s intended to partner, the FR-12 is aimed at professional and serious amateur players, so we like the simple yet effective tone controls as they make it quick and easy to dial in for any environment. And since the price is quite affordable, we can also see lots of these being sold as multi-purpose PA speakers for grassroots bands and performers.
Specs
PRICE: ￡519/$549
ORIGIN: Designed in USA, made in China
OUTPUT: 1,000W
TYPE: Powered full-range cabinet
DIMENSIONS: 597 (w) x 250 (d) x 460mm (h)
WEIGHT (kg/lb): 11.5/28
CABINET: Lightweight plywood
CONTROLS: Volume, bass, middle, treble, cut
CONNECTIONS: Combi jack/XLR input, XLR output
ADDITIONAL FEATURES: Tilt-back legs
OPTIONS: None
RANGE OPTIONS: FR-10 (￡469) features a 10-inch driver and slightly smaller dimensions with identical controls and output power
CONTACT: Fender
